Sonatest Sitescan 500s

$7,576.00

Category: Tag:

Description

Sitescan Series Features
Customisable & Inituitive Menus
Split DAC/AVG/DGS
Angle Measurement Mode.
Configurable on-board software.
Field Upgradeable.
Encoded B-Scan
A-Scan Fade.
4GByte on-board memory.
USB Interface for PC import/export.
Video Output for training.

Sizing Techniques & Software Options include
DAC (Standard)
Defined by up to 20 reference points or converted from TCG curve and digitally drawn on the screen. DAC curves meet the requirements of EN1714, ASME, JIS and many other standards. Custom DAC curves can be selected. DAC dynamic range can be extended by automatically adjusting the reference curve to match the reference gain. Scanning Gain and T-Loss available as separate controls. Amplitude readout is selectable between %FSH, % DAC or relative dB.
Split DAC & DGS/AVG (Option)
Adds up to 3 zones of added gain (+12db, +24dB) to the DAC or DGS/AVG curve to enable single-pass scanning of large sections and attenuative materials. Conforms to EN583-2:2001.
TCG (Option)
Time corrected or “Swept” gain, defined by up to 10 reference points or converted from a DAC curve. All points converted to 80% screen height.
Backwall Echo Attenuation (BEA) Option (requires TCG)
0-40dB attenuation applied to the latter part of the time base, to improve the detectability of defects near the back wall and the loss of BWE due to porosity.
AWS (Option)
Built-in calculation and display of factors and parameters required by AWS D1.1
AVG/DGS (Option)
Enables the calculation of pseudo “DAC” curve and equivalent reflector size of UT indications, based on user input of transducer parameters.
API (Option)
On-board flaw sizing method in accordance with API 5UE.
Interface Trigger (Option)
Unlocks the interface trigger gate controls, which hold off the A-Scan acquisition and display until an interface echo is detected within a specific range and amplitude. Used for the elimination of water-path.
Corrosion Software (Option)
Enables complex inspection plans to be uploaded from a PC using the on board UTility software. Features include 2 dimensional thickness logging, storing A-Logs and B-Logs with thickness values, taking multiple readings per location and note creation for each grid location. A B-Scan option available to display bar-graph views of thickness readings taken by Gate 1 against distance or time.

Sitescan 500S Accessories
Sitescan Standard Kit
Sitescan 500S Digital Flaw Detector
Battery, Charger, charger mains cable.
User Guide & Calibration Certificate.
Certificate of Conformance
Carry Bag.
UT-lity & USB cable.
Display Window Cover.
Ultrasonic Couplant.
B-Scan Encoder Option
The Sonatest series of flaw detectors are suitable for Corrosion Mapping using linear encoded scanners like the EZ-scan 4 (as seen on the right).
Ideal applications include Storage Tank bottom and side walls, flat plates and pipes with a 10cm (4″) or greater outside diameter.
Rubber Boot Accessory
Customised Rubber “shell” that fits around the instrument for extra protection and insulation. (D-50 only)
UT-lity Pro (Advanced User Software)
UT-lity Pro is the “professional” version and works in conjunction with the Corrosion Software option, providing the end user with the ability to create and manage inspection plans, location notes, historical thickness readings and other asset management information as required.
Set up Inspection plan (grid) templates, notes and labels.
Import previous readings into an inspection plan
Export Inspection plan data to spreadsheets and plant maintenance databases.

Reviews

There are no reviews yet.

Be the first to review “Sonatest Sitescan 500s”

Your email address will not be published. Required fields are marked *